SECTION FF3: CONTROL CABLES: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== Build Instruction Updates === * N/A Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here]") |
m (→Page FF3-2) |
||
| (9 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
* N/A | * N/A | ||
Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | ||
=== Tools === | |||
* [https://www.mcfarlaneaviation.com/products/category/push-pull-control-wrench/ Push Pull Control Cable wrenches]<br>[[File:Tool132-in-use--mas.jpg|400x400px]] | |||
=== General Hints === | |||
* The exact push pull cable lengths you need are usually very specific to your airplane / the options you have. Run a pitot hose or something similarly stiff along the planned route and measure exactly what you need. | |||
* If you use the '''AeroSport Products throttle quadrant''', with the standard Van’s firewall pass-through locations, and an IO540 with '''Barrett cold air induction''', and '''EFII''' system (specifically the air intake), then the throttle control cable needs to be 70.5” long. So a 176-VTT-2.25-70.5 needs to be ordered from California Push-Pull instead of the 176-VTT-2.25-65.5 that is called out on the AeroSport Products website. | |||
=== Page FF3-2 === | |||
* Step 6: The torque spec for the 11/16 nuts of the control cables and the jam nuts is hard to find. See this [https://www.facebook.com/groups/vansrv10/posts/8501235603330797 FB thread] for a suggestion.<br>[[File:Screenshot 2024-11-04 at 7.00.17 AM.png|400px]]<br>Someone found this spec from a throttle body installation manual (not an RV-10). | |||
[[Category:Hints]] | |||
Latest revision as of 15:09, 4 November 2024
Build Instruction Updates
- N/A
Check for more recent updates here
Tools
General Hints
- The exact push pull cable lengths you need are usually very specific to your airplane / the options you have. Run a pitot hose or something similarly stiff along the planned route and measure exactly what you need.
- If you use the AeroSport Products throttle quadrant, with the standard Van’s firewall pass-through locations, and an IO540 with Barrett cold air induction, and EFII system (specifically the air intake), then the throttle control cable needs to be 70.5” long. So a 176-VTT-2.25-70.5 needs to be ordered from California Push-Pull instead of the 176-VTT-2.25-65.5 that is called out on the AeroSport Products website.
Page FF3-2
- Step 6: The torque spec for the 11/16 nuts of the control cables and the jam nuts is hard to find. See this FB thread for a suggestion.
Someone found this spec from a throttle body installation manual (not an RV-10).
