SECTION 13: MAIN SPAR: Difference between revisions
Jump to navigation
Jump to search
m (→Page 13-2) |
m (→Page 13-2) |
||
| Line 6: | Line 6: | ||
* Figure 1 shows an "extra" hole on the flange. It is not used anywhere, does not need countersinking.<br>[[File:2022-08-05 15-56-39.jpg|500x500px]] | * Figure 1 shows an "extra" hole on the flange. It is not used anywhere, does not need countersinking.<br>[[File:2022-08-05 15-56-39.jpg|500x500px]] | ||
* Step 7: Study figure 2 which points out that the long stiffeners align at the outboard end while the short stiffeners align at the inboard end. | * Step 7: Study figure 2 which points out that the long stiffeners align at the outboard end while the short stiffeners align at the inboard end. | ||
* Step 8: See this [https://www.facebook.com/groups/vansrv10/posts/5941123952675321 FB thread] regarding how to manage the imperfect overlay of the long and short stiffener. | |||
==== Page 13-4 ==== | ==== Page 13-4 ==== | ||
* Step 4 has you installing AN426AD4-6 rivets, but the rivets are not part of the SB kit (as of 3/2022). | * Step 4 has you installing AN426AD4-6 rivets, but the rivets are not part of the SB kit (as of 3/2022). | ||
**Some builders indicate that the rivets are included in the SB kits. | **Some builders indicate that the rivets are included in the SB kits. | ||
Revision as of 23:15, 29 March 2023
Build Instruction Updates
- N/A
Check for more recent updates here
Page 13-2
- Figure 1 shows an "extra" hole on the flange. It is not used anywhere, does not need countersinking.
- Step 7: Study figure 2 which points out that the long stiffeners align at the outboard end while the short stiffeners align at the inboard end.
- Step 8: See this FB thread regarding how to manage the imperfect overlay of the long and short stiffener.
Page 13-4
- Step 4 has you installing AN426AD4-6 rivets, but the rivets are not part of the SB kit (as of 3/2022).
- Some builders indicate that the rivets are included in the SB kits.