SECTION 34: BAGGAGE DOOR: Difference between revisions
Jump to navigation
Jump to search
m (→Page 34-6) |
m (→Page 34-6) |
||
| Line 8: | Line 8: | ||
[[Category:Hints]] | [[Category:Hints]] | ||
==== Page 34-6 ==== | ==== Page 34-6 ==== | ||
* Step 5 - If you have a Quick Build, you can't reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. | * Step 5 - If you have a Quick Build, you can't reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or a 12 inch back rivet set. | ||
Revision as of 04:03, 11 December 2023
Build Instruction Updates
- N/A
Check for more recent updates here
Hints
- Ed's video on how to make the door removable
Note: you will need more hinge pin length than with the stock setup. Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.
Page 34-6
- Step 5 - If you have a Quick Build, you can't reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or a 12 inch back rivet set.