SECTION 40: FLAP SYSTEM: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
* 11/05/2022 [https://www.vansaircraft.com/wp-content/uploads/2022/09/40_10.pdf 40_10.pdf] | * 11/05/2022 [https://www.vansaircraft.com/wp-content/uploads/2022/09/40_10.pdf 40_10.pdf] | ||
Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | ||
=== Hints === | |||
==== Page 40-4 ==== | |||
* Step 4: See [[:Media:Flapbush.pdf|this pdf]] with 4 templates for the cutout with rounding radiuses applied. Print at 100%. The outer corner dimensions on the printout should be 2.5" * 1.75". | |||
==== Flap Position Sensor ==== | ==== Flap Position Sensor ==== | ||
* The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS12 sensor. See section [[Flap_Position_Sensor]] | * The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS12 sensor. See section [[Flap_Position_Sensor]] | ||
[[Category:Hints]] | [[Category:Hints]] | ||
Revision as of 08:37, 5 March 2024
Build Instruction Updates
Check for more recent updates here
Hints
Page 40-4
- Step 4: See this pdf with 4 templates for the cutout with rounding radiuses applied. Print at 100%. The outer corner dimensions on the printout should be 2.5" * 1.75".
Flap Position Sensor
- The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS12 sensor. See section Flap_Position_Sensor