CAD CAM Files: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
* [[Media:Door hinge shim2.dxf|Door hinge shim dxf file]]<br>[[File:2025-08-05 10-32-45.jpg|300x300px]] | * [[Media:Door hinge shim2.dxf|Door hinge shim dxf file]]<br>[[File:2025-08-05 10-32-45.jpg|300x300px]]<br>After match drilling the door hinges, it's quite possible that the doors are sitting too low in the frame on the upper edge. By making shims of different thicknesses, e.g. 0.020, 0.040, and .063, the door can be made flush in the top section. Note: the holes in the hinges that ship with the kit don't have very precise positions, so an additional match drill step from the hinge to the shim is required. | ||
Revision as of 17:49, 5 August 2025
- Door hinge shim dxf file
After match drilling the door hinges, it's quite possible that the doors are sitting too low in the frame on the upper edge. By making shims of different thicknesses, e.g. 0.020, 0.040, and .063, the door can be made flush in the top section. Note: the holes in the hinges that ship with the kit don't have very precise positions, so an additional match drill step from the hinge to the shim is required.
