3D-Printed Tools and Parts: Difference between revisions

Revision as of 14:02, 18 September 2025

See also section CAD_CAM_Files if you have a CNC machine.
Consider joining the 3D Printed Aircraft Parts FB group.

End cap for armrest

End Cap stl file
Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3).

Hinge alignment jig STL file
Headset hanger
foto
stl file
Throttle quadrant handle
foto
stl file

@@ Line 21: / Line 21: @@
 * End cap for armrest<br>[[File:Screenshot 2025-02-16 at 4.25.49 PM.png|300x300px]]<br>[[File:Arm rest cap.jpg|300x300px]]<br>[[Media:Center Console - armrest endcap.stl|End Cap stl file]]
-* Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3).
+* Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3).<br>[[File:Door Alignement Jig.jpg|300px]]<br><br>[[File:Hinge Jig In Use.jpg|300px]]<br>[[Media:Hinge Bracket Jig STL file.stl|Hinge alignment jig STL file]]
-[[File:Door Alignement Jig.jpg|left|thumb|Door alignment jig]]
+* Headset hanger<br>foto<br>stl file
+[[Category:Optional]]
+* Throttle quadrant handle<br>foto<br>stl file
-[[Media:Hinge Bracket Jig STL file.stl|Hinge alignment jig STL file]]
-[[File:Hinge Jig In Use.jpg|left|thumb]]
 [[Category:Optional]]