Antennas: Difference between revisions
		
		
		
		Jump to navigation
		Jump to search
		
m (→Antennas)  | 
				|||
| Line 43: | Line 43: | ||
[[File:Archer plot1.jpg|600x600px]]  | [[File:Archer plot1.jpg|600x600px]]  | ||
=== Antenna Placement ===  | === ELT Antenna Placement ===  | ||
* ELT antenna installation is governed by 14 CFR § 91.207 and AC 91-44A:  It asks for:  | * ELT antenna installation is governed by 14 CFR § 91.207 and AC 91-44A:  It asks for:  | ||
Revision as of 14:37, 29 May 2022
Mounting Instructions
- EAA Videos
 
Antennas
Example of Bob Archer NAV / Glideslope Antenna mounted in aftermarket Aveo ZipTip.
Frequency plot of Bob Archer antenna (shows 50 Ohm and resonance in the VOR/LOC frequency range of 108-118 MHz):
ELT Antenna Placement
- ELT antenna installation is governed by 14 CFR § 91.207 and AC 91-44A:  It asks for:
- "Proper installation" (which means you need to follow the installation instruction from the ELT manufacturer)
 - "The presence of a sufficient signal radiated from its antenna" (annual test).
 - The antenna to be vertically mounted
 
 - You may install the antenna inside the airplane if
- The airplane skin is non conductive (the RV-10 fiberglass canopy area should be fine) or the antenna is centered behind a window of at least 12 x 12 inch size
 - You provide a ground plane for it (24 inches radius for 121 MHz!)