SECTION 32: TAILCONE ATTACHMENT: Difference between revisions
Jump to navigation
Jump to search
(→Hints) |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Tailcone_attachment.jpeg|500px]] | |||
== Hints == | == Hints == | ||
* Stack at floor joint from bottom to top: | * Stack at floor joint from bottom to top: | ||
Revision as of 08:06, 21 March 2022
Hints
- Stack at floor joint from bottom to top:
- fuse skin (F-1077)
- tailcone skin (F-1078)
- bulkhead (F-1006B)
- rib tabs (e.g. F-1019-R)
- Use plastic wedges to guide the tailcone bottom skin to go above the fuselage bottom skin, e.g. at Amazon
- Use two thin strips of aluminum (3/4 inch wide) in the bottom corner sections to guide the tabs of the tailcone to go inside the fuselage skin.
- Use an inflated 20 inch truck inner tube underneath the fuselage center to lift the fuselage slightly, allowing a swivel motion within the fuselage cradle constraints e.g. at Amazon