Oil Cooler: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
== Larger Oil Cooler == | == Larger Oil Cooler == | ||
* [https://www.aircraftspruce.com/catalog/pnpages/08-13964.php Airflow Systems 2007X Oil Cooler] | * [https://www.aircraftspruce.com/catalog/pnpages/08-13964.php Airflow Systems 2007X Oil Cooler] | ||
* [https://www.aircraftspruce.com/catalog/pnpages/08-13968.php Spacers and bolts]<br>Note: the kit contains three longer bolts for the upper holes (use thick washers) and three slightly shorter bolts for the lower holes (use thin washers). | |||
* The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount. | * The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount. | ||
* The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount. | * The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount. | ||
Revision as of 15:44, 24 April 2023
Larger Oil Cooler
- Airflow Systems 2007X Oil Cooler
- Spacers and bolts
Note: the kit contains three longer bolts for the upper holes (use thick washers) and three slightly shorter bolts for the lower holes (use thin washers). - The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount.
- The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount.