Oil Cooler: Difference between revisions

Revision as of 15:50, 24 April 2023

Airflow Systems 2007X Oil Cooler
Spacers and bolts
Note: the kit contains three longer bolts for the upper holes (use thick washers) and three slightly shorter bolts for the lower holes (use thin washers).
The larger oil cooler is taller. Add an angle bracket to the top for the top line of holes. Enlarge the cut-out of the Van's oil cooler bracket to utilize the topmost part of the oil cooler.
The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount.
The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount.

@@ Line 4: / Line 4: @@
 * [https://www.aircraftspruce.com/catalog/pnpages/08-13964.php Airflow Systems 2007X Oil Cooler]
 * [https://www.aircraftspruce.com/catalog/pnpages/08-13968.php Spacers and bolts]<br>Note: the kit contains three longer bolts for the upper holes (use thick washers) and three slightly shorter bolts for the lower holes (use thin washers).
-* The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount.<br>[[File:2023-04-23 16-40-23.jpg|300x300px]]
+* The larger oil cooler is taller. Add an angle bracket to the top for the top line of holes. Enlarge the cut-out of the Van's oil cooler bracket to utilize the topmost part of the oil cooler.
+*The upper forward flange needs to be trimmed to the inside of the most inner hole for the engine mount.<br>[[File:2023-04-23 16-40-23.jpg|300x300px]]
 *The bottom outside hole needs to be fastened with a short AN3-4 bolt as a long bolt will not pass the engine mount.