SECTION 40: FLAP SYSTEM: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
| Line 7: | Line 7: | ||
* Step 4: See [[:Media:Flapbush.pdf|this pdf]] with 4 templates for the cutout with rounding radiuses applied. Print at 100%. The outer corner dimensions on the printout should be 2.5" * 1.75". | * Step 4: See [[:Media:Flapbush.pdf|this pdf]] with 4 templates for the cutout with rounding radiuses applied. Print at 100%. The outer corner dimensions on the printout should be 2.5" * 1.75". | ||
==== Flap Position Sensor ==== | ==== Flap Position Sensor ==== | ||
* The old flap motor (before mid 2022) has no built-in position sensor and needs an external | * The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS-12 sensor. See section [[Flap_Position_Sensor]] | ||
[[Category:Hints]] | [[Category:Hints]] | ||
Revision as of 22:21, 12 March 2024
Build Instruction Updates
Check for more recent updates here
Hints
Page 40-4
- Step 4: See this pdf with 4 templates for the cutout with rounding radiuses applied. Print at 100%. The outer corner dimensions on the printout should be 2.5" * 1.75".
Flap Position Sensor
- The old flap motor (before mid 2022) has no built-in position sensor and needs an external POS-12 sensor. See section Flap_Position_Sensor