SECTION OP-56: TAIL LIGHTING: Difference between revisions

Revision as of 15:45, 31 March 2022

Notes:

The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:

Photo by J. Tremble
See also discussions
- FB Post 3/31/2022
- FB Post 3/29/2022
- FB Post 12/24/2019

@@ Line 1: / Line 1: @@
 Notes:
-* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg|200px]]
+* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg|200px]]<br>Photo by J. Tremble
 * See also discussions
 ** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]
 ** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
 ** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]