SECTION 26: MID FUSE RIBS & BOTTOM SKINS

From RV10 Community Wiki
Revision as of 17:04, 21 March 2022 by 1001001 (talk | contribs) (Created page with "==PAGE 26-5 == Consider at this point whether you need access holes in the F-1017 under-seat ribs for conduit and/or antenna wiring. Many builders cut holes in the F-1017 ribs for conduit passthroughs. These holes will be much easier to cut at this point. Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

PAGE 26-5

Consider at this point whether you need access holes in the F-1017 under-seat ribs for conduit and/or antenna wiring. Many builders cut holes in the F-1017 ribs for conduit passthroughs. These holes will be much easier to cut at this point.

Also consider marking and cutting/installing antenna doublers on the bottom skins in this general section. This will be much easier now than later, when the seat plates are permanently riveted in place.

Retrieved from "https://rv10.org/index.php?title=SECTION_26:_MID_FUSE_RIBS_%26_BOTTOM_SKINS&oldid=37"