RV10 Community Wiki - Recent changes [en]

RV10 Community Wiki

Martin — Thu, 07 May 2026 07:07:11 GMT

Optional Sections

← Older revision		Revision as of 07:07, 7 May 2026
(3 intermediate revisions by the same user not shown)
Line 127:		Line 127:
	* [[SECTION OP-60: (AD)AHRS BRACKETS]]		* [[SECTION OP-60: (AD)AHRS BRACKETS]]
	* [[SECTION OP-64: RV-10 FLAP MOTOR RETROFIT]]		* [[SECTION OP-64: RV-10 FLAP MOTOR RETROFIT]]
	* [[TEST]]
	----		----

TEST

Martin — Thu, 07 May 2026 07:04:25 GMT

Martin moved page TEST to TEST2

New page

FOO

TEST

Martin — Thu, 07 May 2026 07:04:14 GMT

Created page with "FOO"

New page

FOO

RV10 Community Wiki

Martin — Thu, 07 May 2026 07:03:57 GMT

Optional Sections

← Older revision		Revision as of 07:03, 7 May 2026
Line 127:		Line 127:
	* [[SECTION OP-60: (AD)AHRS BRACKETS]]		* [[SECTION OP-60: (AD)AHRS BRACKETS]]
	* [[SECTION OP-64: RV-10 FLAP MOTOR RETROFIT]]		* [[SECTION OP-64: RV-10 FLAP MOTOR RETROFIT]]
			* [[TEST]]
	----		----

SECTION 23: AILERON ACTUATION

Jeffp — Sun, 03 May 2026 19:39:31 GMT

Added a gotcha for this page

← Older revision		Revision as of 19:39, 3 May 2026
Line 15:		Line 15:

	* Figure 1 implies there is a bearing installed on the forward end in the Tank Attach Bracket. In my QB wing kit, this bearing was not installed, but was included in wing parts. Instructions for installing this bearing are on page 18-5, step 5.		* Figure 1 implies there is a bearing installed on the forward end in the Tank Attach Bracket. In my QB wing kit, this bearing was not installed, but was included in wing parts. Instructions for installing this bearing are on page 18-5, step 5.
			* Figure 1 Calls for AN364-428 (2 places) but this nut is not included in the inventory. It was changed from an AN365 to an AN364 at somepoint in the past for a lower profile nut. However, inventory wasn't updated to include the nut (as of 2/26).

	==== page 23-9 ====		==== page 23-9 ====

User:Jeffp

Jeffp — Sun, 03 May 2026 19:35:39 GMT

User account Jeffp was created

SECTION 45: CABIN DOORS & TRANSPARENCIES

Martin — Sat, 02 May 2026 06:36:06 GMT

Silpruf Method

← Older revision		Revision as of 06:36, 2 May 2026
(One intermediate revision by the same user not shown)
Line 152:		Line 152:
	* Notes		* Notes
	** This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation (note: door is double walled and holes don't go through).		** This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation (note: door is double walled and holes don't go through).
			** Be careful with wing nut clecos: Since the doors are double walled, you may not be able to fully insert the wing nut cleco in shallow areas. Do not proceed if this happens, rather use a thicker stack of wood pieces. As you tighten the wing nut cleco, the spreader dowel of the cleco is being pushed into the hole. If it hits the inside skin, and you keep tightening, you will pull the cleco out and the hole is ruined.
	** Consider using a thin piece of metal, e.g. a 3/1000" feeler gauge, to protect the window while drilling.		** Consider using a thin piece of metal, e.g. a 3/1000" feeler gauge, to protect the window while drilling.
	** The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well. Excellent is also the Harbor Freight 3x21 belt sander with 120 Grit belt (hang it off an engine hoist or ceiling to relieve wrist forces).		** The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well. Excellent is also the Harbor Freight 3x21 belt sander with 120 Grit belt (hang it off an engine hoist or ceiling to relieve wrist forces).<br>[[File:Belt sander.jpg\|300x300px]]
	** 6mm Scotch Performance Masking Tape 233+, 26344, is a suitable masking tape ([https://www.amazon.com/dp/B002C47XMU])		** 6mm Scotch Performance Masking Tape 233+, 26344, is a suitable masking tape ([https://www.amazon.com/dp/B002C47XMU])
	** Scotch Contractor Grade Masking Tape, tan, 1.41" is suitable as tape for the inside [https://www.amazon.com/dp/B008LAQYL0]		** Scotch Contractor Grade Masking Tape, tan, 1.41" is suitable as tape for the inside [https://www.amazon.com/dp/B008LAQYL0]

File:Belt sander.jpg

Martin — Fri, 01 May 2026 17:24:24 GMT

Martin uploaded File:Belt sander.jpg

New page

belt sander usage

SECTION 45: CABIN DOORS & TRANSPARENCIES

Martin — Fri, 01 May 2026 17:22:31 GMT

Silpruf Method

← Older revision		Revision as of 17:22, 1 May 2026
(2 intermediate revisions by the same user not shown)
Line 145:		Line 145:
	* [https://www.sunshinesupply.com/SCS2000Slnt10ozStdCrt Silpruf @ Sunshine Supply]		* [https://www.sunshinesupply.com/SCS2000Slnt10ozStdCrt Silpruf @ Sunshine Supply]
	* [https://www.amazon.com/dp/B000KZYJAW Silpruf @ Amazon] (note that more colors may be available from other sources); you will need at least 2 standard tubes, possibly 3 total.		* [https://www.amazon.com/dp/B000KZYJAW Silpruf @ Amazon] (note that more colors may be available from other sources); you will need at least 2 standard tubes, possibly 3 total.
	* [https://www.sunshinesupply.com/SS4044Prmr1PtUnt SS4044P Primer for Silpruf (cabin side) @ Sunshine Supply]		* [https://www.sunshinesupply.com/SS4044Prmr1PtUnt SS4044P Primer for Silpruf (cabin side) @ Sunshine Supply] (optional, not needed if Gelcoat gets removed)
	* [https://www.youtube.com/watch?v=A336SG-fsiI 5-part instructional video]		* [https://www.youtube.com/watch?v=A336SG-fsiI 5-part instructional video]
	* See also [[Media:SilPruf Window instructions.pdf\|Dan H's write-up of the above Silpruf Method]]		* See also [[Media:SilPruf Window instructions.pdf\|Dan H's write-up of the above Silpruf Method]]
Line 151:		Line 151:
	* See also this [https://www.facebook.com/groups/vansrv10/posts/10058622124258796 FB Thread].		* See also this [https://www.facebook.com/groups/vansrv10/posts/10058622124258796 FB Thread].
	* Notes		* Notes
	** This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.		** This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation (note: door is double walled and holes don't go through).
	** The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.		** Consider using a thin piece of metal, e.g. a 3/1000" feeler gauge, to protect the window while drilling.
			** The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well. Excellent is also the Harbor Freight 3x21 belt sander with 120 Grit belt (hang it off an engine hoist or ceiling to relieve wrist forces).
			** 6mm Scotch Performance Masking Tape 233+, 26344, is a suitable masking tape ([https://www.amazon.com/dp/B002C47XMU])
			** Scotch Contractor Grade Masking Tape, tan, 1.41" is suitable as tape for the inside [https://www.amazon.com/dp/B008LAQYL0]
			** Expo Wet Erase Markers are suitable [https://www.amazon.com/dp/B00006IFGQ]
			** If you cut paint sticks, cut them first in half, then cut off the length you need. If you cut across, they will break under load.
			** Permatex Ultra Black is suitable[https://www.amazon.com/dp/B0002UEN1U]
			** Cleanroom 6x6 pads Lint Free are suitable[https://www.amazon.com/dp/B0FBG71JPB]

	=== Sikaflex ===		=== Sikaflex ===